Difference between revisions of "6-Pack"

From MMM Wiki
Jump to: navigation, search
(Availability:)
 
(5 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
Modules are mounted using #6x1/2 sheet metal screws.
 
Modules are mounted using #6x1/2 sheet metal screws.
  
The case will require an external +/-15VDC power source.
+
The case will require an external +/-15VDC power source. See below.
  
 +
Measurements: 21-3/4" W x 4-1/2" H x 5" D
  
replaceable- pre-drilled module wood mounting rails.  
+
Replaceable- pre-drilled module wood mounting rails.  
 
Rubber feet  
 
Rubber feet  
 
Handle  
 
Handle  
Line 16: Line 17:
 
Power expansion 6-pin DIN
 
Power expansion 6-pin DIN
  
Requires an external +/-15V power supply  
+
'''Requires an external +/-15V power supply:'''
 +
We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.
  
Recommend the XP Power model PCM5OUDO8 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.
 
 
   
 
   
  
Custom woods and finishes are available; please contact us for more information.  
+
''Custom woods and finishes are available; please contact us for more information.''
  
  
  
  
[edit] Availability  
+
 
This cabinet is currently available. $189.00
+
== Availability: ==
 +
 +
This cabinet is currently available. '''$200.00'''

Latest revision as of 09:59, 7 June 2014

6P-case.JPG


The 6-pack is a low-cost starter case capable of containing qty 6, Mattson modules. It has wood mounting rails that can be removed and replaced.

Modules are mounted using #6x1/2 sheet metal screws.

The case will require an external +/-15VDC power source. See below.

Measurements: 21-3/4" W x 4-1/2" H x 5" D

Replaceable- pre-drilled module wood mounting rails. Rubber feet Handle Power entry 5-pin DIN Power distribution for 6 modules Power expansion 6-pin DIN

Requires an external +/-15V power supply: We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.


Custom woods and finishes are available; please contact us for more information.



Availability:

This cabinet is currently available. $200.00