Dual Low Frequency Oscillator: Difference between revisions
No edit summary |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 48: | Line 48: | ||
This module is currently available. | This module is currently available. | ||
'''$ | '''$195.00''' | ||
[[Dual Low Frequency Oscillator Board |Assembled/ tested board only:]] | |||
'''$89.00''' | |||
== Info == | |||
'''Current draw:''' | |||
V+= 20.00mA | |||
V-= 17.70mA | |||
'''PCB board dimensions:''' | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm | |||
Latest revision as of 19:35, 7 June 2014
Two independent LFOs in one module.
Each LFO contains two simultaneously available square and triangle waveform outputs.
Each output can be skewed to waveform extremes. i.e. square can be skewed from narrow-positive pulse widths through square to narrow-negative pulse widths.
Positive Pulse
Square
Negative Pulse
Triangle can be skewed from positive saw through triangle to negative saw.
Sawtooth
Triangle
Inverted Sawtooth
Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO
Availability[edit]
This module is currently available. $195.00
Assembled/ tested board only: $89.00
Info[edit]
Current draw:
V+= 20.00mA
V-= 17.70mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
