Dual Low Frequency Oscillator: Difference between revisions
(→Info) |
|||
| Line 58: | Line 58: | ||
== Info == | == Info == | ||
Current draw: | '''Current draw:''' | ||
V+= 20.00mA | V+= 20.00mA | ||
| Line 64: | Line 64: | ||
V-= 17.70mA | V-= 17.70mA | ||
PCB board dimensions: | '''PCB board dimensions:''' | ||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | 3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | ||
Revision as of 22:30, 31 December 2009
Two independent LFOs in one module.
Each LFO contains two simultaneously available square and triangle waveform outputs.
Each output can be skewed to waveform extremes. i.e. square can be skewed from narrow-positive pulse widths through square to narrow-negative pulse widths.
Positive Pulse
Square
Negative Pulse
Triangle can be skewed from positive saw through triangle to negative saw.
Sawtooth
Triangle
Inverted Sawtooth
Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO
Availability
This module is currently available. $179.00
Assembled/ tested board only: $84.95
Info
Current draw:
V+= 20.00mA
V-= 17.70mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
