Difference between revisions of "Main Page"

From MMM Wiki
Jump to: navigation, search
(MMM Modules)
 
(28 intermediate revisions by 2 users not shown)
Line 10: Line 10:
  
 
'''6-pack. Six-module starter case with wood rails'''
 
'''6-pack. Six-module starter case with wood rails'''
 +
 +
''Order choice of modules seperately''
  
  
Line 30: Line 32:
 
Each Vertical and Horizontal cabinet contains space for 12 modules fed by an external power supply, providing for a truly portable, 12 module, analog modular system.
 
Each Vertical and Horizontal cabinet contains space for 12 modules fed by an external power supply, providing for a truly portable, 12 module, analog modular system.
  
As your budget and needs grow, the system has been designed to interlock with additional systems, horizontally and vertically, for virtually infinite system expansion.
+
As your budget and needs grow, the system has been designed to interlock with additional systems for virtually infinite system expansion.
  
 
When you’re ready to go, each pair of cabinets can latch face-to face (with the optional hinge sets attached) into a compact, protective enclosure measuring 11-3/8” (28.89cm) W X 15” (38.1cm) H X 7” (17.78cm) D. Roughly, the size of 6 packages of printer paper stacked 3 high, side by side.
 
When you’re ready to go, each pair of cabinets can latch face-to face (with the optional hinge sets attached) into a compact, protective enclosure measuring 11-3/8” (28.89cm) W X 15” (38.1cm) H X 7” (17.78cm) D. Roughly, the size of 6 packages of printer paper stacked 3 high, side by side.
Line 36: Line 38:
 
Each system with a MIDI module responds to one of 16 MIDI channels if so desired. Grow your system into a larger system with more creative power available than is available in a larger format system of the same size. When it’s time to go, the entire system breaks down easily into independent, easy to transport cases.
 
Each system with a MIDI module responds to one of 16 MIDI channels if so desired. Grow your system into a larger system with more creative power available than is available in a larger format system of the same size. When it’s time to go, the entire system breaks down easily into independent, easy to transport cases.
  
 +
== Starter Systems ==
 +
'''Two basic starter system packages are now available.'''
  
== Starter Systems ==
+
One system with MIDI and one system without MIDI.
Two basic starter system packages are now available.  
 
  
One with MIDI and one without MIDI.
+
Each system as a bundled package cost less than the cost of the individual components.
  
 
Case options include Horizontal or Vertical cases with a selection of either Walnut or Maple construction.
 
Case options include Horizontal or Vertical cases with a selection of either Walnut or Maple construction.
Line 64: Line 67:
  
 
Rubber feet
 
Rubber feet
 
Vertical interlocking hardware (for vertical stacking)
 
  
 
Power entry
 
Power entry
Line 81: Line 82:
 
* [[6-Pack]]
 
* [[6-Pack]]
 
* [[Power supply locator]]
 
* [[Power supply locator]]
 +
* [[DC interconnect cable]]
 
* [[Hinge Set A]]
 
* [[Hinge Set A]]
 
* [[Hinge Set B]]
 
* [[Hinge Set B]]
Line 87: Line 89:
 
''Note: Custom cabinets, wood species and configurations are available on request.  Please contact us for more information.''
 
''Note: Custom cabinets, wood species and configurations are available on request.  Please contact us for more information.''
  
[[Image:MattsonMiniModular-Matrix.gif]] [[Image:P2274715.JPG|140px]] [[Image:Ichabod.jpg|160px]] [[Image:SJ_cab_3.JPG|140px]]
+
[[Image:MattsonMiniModular-Matrix.gif]] [[Image:P2274715.JPG|140px]] [[Image:Ichabod.jpg|160px]] [[Image:SJ_cab_3.JPG|140px]] [[Image:Floor_system.jpg|150px]]
  
 
== MMM Modules ==
 
== MMM Modules ==
Line 111: Line 113:
 
'''CV generation:'''
 
'''CV generation:'''
  
[[Image:Dual-LFO-3.jpg|100px||Dual LFO]] [[Image:VC-Dual-LFO-3.jpg|100px|Voltage Controlled Dual Low Frequency Oscillator]] [[Image:Sample-Hold-3.jpg|100px||Sample & Hold]] [[Image:Envelope-Generator-3.jpg|100px||Envelope Generator]] [[Image:AD1.jpg|100px||QuAD /ASR Envelope Generator]] [[Image:Utility1-3.jpg|100px|Utility 1]]
+
[[Image:Dual-LFO-3.jpg|100px||Dual LFO]] [[Image:VC-Dual-LFO-3.jpg|100px|Voltage Controlled Dual Low Frequency Oscillator]] [[Image:Sample-Hold-3.jpg|100px||Sample & Hold]] [[Image:Envelope-Generator-3.jpg|100px||Envelope Generator]] [[Image:Quad-ASR-3.jpg|100px||QuAD /ASR Envelope Generator]] [[Image:Utility1-3.jpg|100px|Utility 1]] [[Image:Sq816mattsonFormat01.jpg|280px|SQ1 Sequencer]]
 +
 
 
* '''LF1''' [[Dual Low Frequency Oscillator]]
 
* '''LF1''' [[Dual Low Frequency Oscillator]]
 
* '''VLF1''' [[Voltage Controlled Dual Low Frequency Oscillator]]
 
* '''VLF1''' [[Voltage Controlled Dual Low Frequency Oscillator]]
Line 118: Line 121:
 
* '''AD1''' [[QuAD /ASR Envelope Generator]]
 
* '''AD1''' [[QuAD /ASR Envelope Generator]]
 
* '''UT1''' [[Utility 1]] ''(Manual gate, auto clock and divider)''
 
* '''UT1''' [[Utility 1]] ''(Manual gate, auto clock and divider)''
 +
* '''SQ816''' [[Sequencer]]
  
  
 
'''Signal modifiers:'''
 
'''Signal modifiers:'''
  
[[Image:JP-VCF-3.jpg|100px||JP-VCF]] [[Image:VCA-3.jpg|100px||VCA]] [[Image:QVCA1.jpg|100px||VCO-J]] [[Image:Gate-Delay-3.jpg|100px|4x Gate Delay]] [[Image:Glide-3.jpg|100px||Glide]] [[Image:Amplitude-Follower-3.jpg|100px|Amplitude Follower]]
+
[[Image:JP-VCF-3.jpg|100px||JP-VCF]] [[Image:VCA-3.jpg|100px||VCA]] [[Image:Quad-VCA-3.jpg|100px||Quad VCA]] [[Image:Gate-Delay-3.jpg|100px|4x Gate Delay]] [[Image:Glide-3.jpg|100px||Glide]] [[Image:Amplitude-Follower-3.jpg|100px|Amplitude Follower]]
 
* '''FV1''' [[Voltage Controlled Filter]]
 
* '''FV1''' [[Voltage Controlled Filter]]
 
* '''AV1''' [[Voltage Controlled Amplifier]] ''(plus-morphing Ring Modulation)''
 
* '''AV1''' [[Voltage Controlled Amplifier]] ''(plus-morphing Ring Modulation)''
* '''QVCA1'''[[Quad Voltage Controlled Amplifier]]
+
* '''QVCA1''' [[Quad Voltage Controlled Amplifier]]
 
* '''GD1''' [[4x Gate Delay]]
 
* '''GD1''' [[4x Gate Delay]]
 
* '''LP1''' [[Glide]] ''(portamento, lag processor)''
 
* '''LP1''' [[Glide]] ''(portamento, lag processor)''
Line 133: Line 137:
 
'''Mixing/ routing:'''
 
'''Mixing/ routing:'''
  
[[Image:Mixer-3.jpg|100px||4 x Mixer]] [[Image:VC-Mixer-3.jpg|100px|Voltage Controlled Mixer]] [[Image:Buffer-3.jpg|100px||4x-1x2Buffer]] [[Image:VCM1 5U.jpg|100px]]
+
[[Image:Mixer-3.jpg|100px||4 x Mixer]] [[Image:VC-Mixer-3.jpg|100px|Voltage Controlled Mixer]] [[Image:Buffer-3.jpg|100px||4x-1x2Buffer]]
 
* '''MX1''' [[4x Mixer]] ''(with manual on/off)''
 
* '''MX1''' [[4x Mixer]] ''(with manual on/off)''
 
* '''VCM1''' [[Voltage Controlled Mixer]] ''(mixed, quad VCA with normal and inverted out)''
 
* '''VCM1''' [[Voltage Controlled Mixer]] ''(mixed, quad VCA with normal and inverted out)''
 
* '''BF1''' [[4x 1x2 Buffer]] ''(Buffered multiple)''
 
* '''BF1''' [[4x 1x2 Buffer]] ''(Buffered multiple)''
* '''VCM1-5U''' [[5U VC Mixer Assembled]] ''(Voltage Controlled Mixer in 5U format)''
+
 
  
  
Line 146: Line 150:
 
* [[Blank Logo Panel]]
 
* [[Blank Logo Panel]]
 
* [[Bare Panel]] ''(make your own layout and graphics)''
 
* [[Bare Panel]] ''(make your own layout and graphics)''
 
 
'''In the works...''' (upcoming modules)
 
 
[[Image:HandiCon-3.jpg|185px|HandiCon]] [[Image:Quantizer-3.jpg|100px|Quantizer]] [[Image:Sequencer-3.jpg|280px|SQ1 Sequencer]]
 
* '''HC1''' [[HandiCon]] ''(Control voltage processor)''
 
* '''QT1''' [[Quantizer]]
 
* '''SQ1''' [[Sequencer]]
 
  
 
== '''DIY''' ==  
 
== '''DIY''' ==  

Latest revision as of 11:49, 4 November 2015

The Mattson Mini Modular UserWiki

Horizontal and vertical filled-small.jpg MMTA-Logo-Positive.jpg


Horizontal and vertical cabinet versions


6P-filled-small.jpg

6-pack. Six-module starter case with wood rails

Order choice of modules seperately


Use this WIKI to learn about our products. To order, visit the MMM Store

Be sure to sign up in our shopping cart.

Registered users can select to receive our newsletter. Allowing you to be informed of any new products, sales or featured products.

All registered customers receive a 1-use, new customer 5% discount coupon as a 'Thank You'!

Just enter newcust5 in the coupon code at checkout.


Introduction

The MMM Phoenix series modular synthesizer incorporates true-analog modules housed in a “grab and go” modular format.

Each Vertical and Horizontal cabinet contains space for 12 modules fed by an external power supply, providing for a truly portable, 12 module, analog modular system.

As your budget and needs grow, the system has been designed to interlock with additional systems for virtually infinite system expansion.

When you’re ready to go, each pair of cabinets can latch face-to face (with the optional hinge sets attached) into a compact, protective enclosure measuring 11-3/8” (28.89cm) W X 15” (38.1cm) H X 7” (17.78cm) D. Roughly, the size of 6 packages of printer paper stacked 3 high, side by side.

Each system with a MIDI module responds to one of 16 MIDI channels if so desired. Grow your system into a larger system with more creative power available than is available in a larger format system of the same size. When it’s time to go, the entire system breaks down easily into independent, easy to transport cases.

Starter Systems

Two basic starter system packages are now available.

One system with MIDI and one system without MIDI.

Each system as a bundled package cost less than the cost of the individual components.

Case options include Horizontal or Vertical cases with a selection of either Walnut or Maple construction.

Ready to use out of the box with the addition of a power supply or DC Interconnect cable depending on if the system is a primary or subsequent system.


MMM Cabinets

Every system starts with a cabinet. There are three cabinet styles available; Vertical and Horizontal 12 module enclosures:

Each measures 11.5” (29.21cm) W X 15” (38.1cm) H X 3.5” (8.89cm) D.

And, a 6-Pack. 6-module starter cabinet with wood mounting rails.

The standard 12-module cabinets are constructed with maple, but other woods are available on request.

Each 12-module cabinet includes:

Drilled and tapped 13 Ga steel mounting frame with 12 module capacity (or blanks)

Rubber feet

Power entry

Power expansion port

Power distribution network

The 50W external power supply is sold seperately. (Cat# PSU-X)

Hinge sets for the 12-module cabinets are sold separately because this is what determines whether each cabinet is an 'A' cabinet or a 'B' cabinet (if you have one of each they will latch together side-by-side or face-to-face.)

Note: Custom cabinets, wood species and configurations are available on request. Please contact us for more information.

MattsonMiniModular-Matrix.gif P2274715.JPG Ichabod.jpg SJ cab 3.JPG Floor system.jpg

MMM Modules

Once you've picked out your cabinets and figured out how you want them to go together it's time to choose your modules.

The modules conform to the electrical, audio and CV standards of most of the currently available systems and can be interfaced with other manufacturers systems.

MIDI, Power control:

MIDI / Power Control Aux Power Control


Sources:

VCO-J VCO-S Noise


CV generation:

Dual LFO Voltage Controlled Dual Low Frequency Oscillator Sample & Hold Envelope Generator QuAD /ASR Envelope Generator Utility 1 SQ1 Sequencer


Signal modifiers:

JP-VCF VCA Quad VCA 4x Gate Delay Glide Amplitude Follower


Mixing/ routing:

4 x Mixer Voltage Controlled Mixer 4x-1x2Buffer


Blank and bare panels: (For filling unused spaces for future modules)

Blank Logo Panel Bare Panel

DIY

Or, FIY: Finish It Yourself

DIYcisions-DIYcisions.jpg Panel-Wires.jpg Power-Cable.jpg P7219560.JPG VCM1 5U assembled.jpg

See a module you like but wish it was in a different format?

Like making stuff?

Now you can get assembled/ tested module boards separately and incorporate them into any format you want.

For more information check out the DIYcisions DIYcisions page.