Sample and Hold: Difference between revisions
(New page: Internal Triangle LFO for sample source. Can be replaced by inputting an external source into the Ext. Osc. In jack. Internal square wave LFO for sample rate selection. Can be replaced by...) |
No edit summary |
||
| Line 5: | Line 5: | ||
inputting an external trigger source into the Ext. Clk. In jack. Source | inputting an external trigger source into the Ext. Clk. In jack. Source | ||
is sampled on the negative to positive transition of the clock. | is sampled on the negative to positive transition of the clock. | ||
[[Image:http://mmm.sevcom.com/wiki/index.php/Image:MMM_Sample_and_Hold.JPG]] | |||
Track & Hold / Sample & Hold select switch. Bypasses the internal sample | Track & Hold / Sample & Hold select switch. Bypasses the internal sample | ||
Revision as of 11:37, 6 November 2008
Internal Triangle LFO for sample source. Can be replaced by inputting an external source into the Ext. Osc. In jack.
Internal square wave LFO for sample rate selection. Can be replaced by inputting an external trigger source into the Ext. Clk. In jack. Source is sampled on the negative to positive transition of the clock.
File:Http://mmm.sevcom.com/wiki/index.php/Image:MMM Sample and Hold.JPG
Track & Hold / Sample & Hold select switch. Bypasses the internal sample strobe in Track position and allows the source to go directly to the output during the lower clock level. When the clock transitions to a high level, the source voltage present at the time of positive clock transition is "held" at the output until the clock transitions low again.
Slide allows for a slew or glide to be added between output transition voltages.
