Starter Systems

Starter system packages contain the modules necessary to begin creating synthesizer patches right away.

There are two basic systems available:

A system containing a MIDI/CV controller for tonal based patches

And, a system with a Power entry module for front panel power control and a Utility 1 module for generating manual or clocked gates for the more allegoric pallate.

Both systems contain the following modules:

Sources:

2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs.

1X Noise Generator. Simultaneous white, pink and slow random outputs.

Modifiers:

1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable.

1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation.

Control voltage generation:

1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions.

1X VC LFO. Voltage controlled dual low frequency oscillator.

1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection.

Mixing and signal routing:

1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals.

1X Buffered Multiple. 4 X 2 signal distribution buffered multiple.

Options:

Either system can be ordered in the vertical(3X4)or horizontal(4X3)case configuration.

Either case can be ordered in Maple or Walnut.

Notes:

Power supply and/or DC Interconnect cable must be ordered seperately. A Power supply can provide enough power to run up to three systems. Second and third cabinets will only need the DC Interconnect cable.