Difference between revisions of "Starter Systems"
(→Availability) |
|||
| Line 22: | Line 22: | ||
'''Both systems contain the following modules:''' | '''Both systems contain the following modules:''' | ||
| − | Sources: | + | '''Sources:''' |
2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs. | 2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs. | ||
| Line 28: | Line 28: | ||
1X Noise Generator. Simultaneous white, pink and slow random outputs. | 1X Noise Generator. Simultaneous white, pink and slow random outputs. | ||
| − | Modifiers: | + | '''Modifiers:''' |
1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable. | 1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable. | ||
| Line 34: | Line 34: | ||
1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation. | 1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation. | ||
| − | Control voltage generation: | + | '''Control voltage generation:''' |
1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions. | 1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions. | ||
| Line 42: | Line 42: | ||
1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection. | 1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection. | ||
| − | Mixing and signal routing: | + | '''Mixing and signal routing:''' |
1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals. | 1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals. | ||
Revision as of 09:52, 2 August 2011
Left:
Horizontal, Walnut Starter system without MIDI.
Right:
Vertical, Maple Starter system with MIDI
Starter system packages contain the modules necessary to begin creating synthesizer patches right away.
There are two basic systems available:
A system containing a MIDI/CV controller for tonal based patches
And, a system with a Power entry module for front panel power control and a Utility 1 module for generating manual or clocked gates for the more allegoric pallate.
Both systems contain the following modules:
Sources:
2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs.
1X Noise Generator. Simultaneous white, pink and slow random outputs.
Modifiers:
1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable.
1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation.
Control voltage generation:
1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions.
1X VC LFO. Voltage controlled dual low frequency oscillator.
1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection.
Mixing and signal routing:
1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals.
1X Buffered Multiple. 4 X 2 signal distribution buffered multiple.
Options:
Either system can be ordered in the vertical(3X4)or horizontal(4X3)case configuration.
Either case can be ordered in Maple or Walnut. Selection of Walnut material will add $15.00.
Notes:
Power supply and/or DC Interconnect cable must be ordered seperately. A Power supply can provide enough power to run up to three systems. Second and third cabinets will only need the DC Interconnect cable.
Availability
These systems are available
Starting at $2,650.00
To order, visit the Shopping cart
