Starter Systems
Created for the budget concious, The basic starter systems save about $200.00 from ordering the system components individually.
Each system is configured to provide a two oscillator voice chain with the basic routing, mixing and modulation CV source modules to get you going right from the start.
Power supply or DC interconnect cable must be ordered seperately.
Left:
Horizontal, Walnut Starter system without MIDI.
Right:
Vertical, Maple Starter system with MIDI
There are two basic systems available:
1) A system containing a MIDI/CV controller for tonal based patches MIDI - Power Control
2) a system with a Power entry module for front panel power control Aux Power Control
including a Utility 1 module for generating manual or clocked gates for the more allegoric pallate. Utility 1
Module Compliment:
Both systems contain the following modules:
Sources:
2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs each. Voltage Controlled Oscillator - Jack Version
1X Noise Generator. Simultaneous white, pink and slow random outputs. Noise
Modifiers:
1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable. Voltage Controlled Filter
1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation. Voltage Controlled Amplifier
Control voltage generation:
1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions. Envelope Generator
1X VC LFO. Voltage controlled dual low frequency oscillator. Voltage Controlled Dual Low Frequency Oscillator
1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection. Sample and Hold
S/H video: Sample and Hold Basic Operations Video
Mixing and signal routing:
1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals. Voltage Controlled Mixer
1X Buffered Multiple. 4 X 2 signal distribution buffered multiple. 4x 1x2 Buffer
Options:
Either system can be ordered in the vertical (3X4) or horizontal (4X3) case configuration.
Either case can be ordered in Maple or Walnut. Selection of Walnut material will add $15.00.
Notes:
Power supply and/or DC Interconnect cable must be ordered separately.
A Power supply can provide enough power to run up to three systems. (up to 36 modules).
Second and third cabinets will only need the DC Interconnect cable.
Availability
These systems are available
Starting at $2,700.00
To order, visit the Shopping cart
