6-Pack: Difference between revisions
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
Modules are mounted using #6x1/2 sheet metal screws. | Modules are mounted using #6x1/2 sheet metal screws. | ||
The case will require an external +/-15VDC power source. | The case will require an external +/-15VDC power source. See below. | ||
Measurements: 21-3/4" W x 4-1/2" H x 5" D | Measurements: 21-3/4" W x 4-1/2" H x 5" D | ||
| Line 17: | Line 17: | ||
Power expansion 6-pin DIN | Power expansion 6-pin DIN | ||
Requires an external +/-15V power supply | '''Requires an external +/-15V power supply:''' | ||
We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet. | |||
We recommend the XP Power model | |||
| Line 31: | Line 30: | ||
== Availability: == | == Availability: == | ||
This cabinet is currently available. '''$ | This cabinet is currently available. '''$200.00''' | ||
Latest revision as of 06:59, 7 June 2014
The 6-pack is a low-cost starter case capable of containing qty 6, Mattson modules. It has wood mounting rails that can be removed and replaced.
Modules are mounted using #6x1/2 sheet metal screws.
The case will require an external +/-15VDC power source. See below.
Measurements: 21-3/4" W x 4-1/2" H x 5" D
Replaceable- pre-drilled module wood mounting rails. Rubber feet Handle Power entry 5-pin DIN Power distribution for 6 modules Power expansion 6-pin DIN
Requires an external +/-15V power supply: We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.
Custom woods and finishes are available; please contact us for more information.
Availability:
This cabinet is currently available. $200.00
