6-Pack: Difference between revisions

From MMM Wiki
Jump to navigationJump to search
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 6: Line 6:
Modules are mounted using #6x1/2 sheet metal screws.
Modules are mounted using #6x1/2 sheet metal screws.


The case will require an external +/-15VDC power source.
The case will require an external +/-15VDC power source. See below.


Measurements: 21-3/4" W x 4-1/2" H x 5" D


Replaceable- pre-drilled module wood mounting rails.  
Replaceable- pre-drilled module wood mounting rails.  
Line 16: Line 17:
Power expansion 6-pin DIN
Power expansion 6-pin DIN


Requires an external +/-15V power supply  
'''Requires an external +/-15V power supply:'''
 
We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.
We recommend the XP Power model PCM5OUDO8 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.


   
   


Custom woods and finishes are available; please contact us for more information.  
''Custom woods and finishes are available; please contact us for more information.''




Line 30: Line 30:
== Availability: ==
== Availability: ==
   
   
This cabinet is currently available. '''$189.00'''
This cabinet is currently available. '''$200.00'''

Latest revision as of 06:59, 7 June 2014


The 6-pack is a low-cost starter case capable of containing qty 6, Mattson modules. It has wood mounting rails that can be removed and replaced.

Modules are mounted using #6x1/2 sheet metal screws.

The case will require an external +/-15VDC power source. See below.

Measurements: 21-3/4" W x 4-1/2" H x 5" D

Replaceable- pre-drilled module wood mounting rails. Rubber feet Handle Power entry 5-pin DIN Power distribution for 6 modules Power expansion 6-pin DIN

Requires an external +/-15V power supply: We recommend the XP Power model PCM50UD08 (Newark P/N: 67K7687)50 Watt external power supply. It will power up to 36 modules or, power up to six, 6-Pack cabinets with the use of the DC-CAB DC interconnect cable for each expansion cabinet.


Custom woods and finishes are available; please contact us for more information.



Availability:

This cabinet is currently available. $200.00