Dual Low Frequency Oscillator: Difference between revisions
(New page: Two independent LFOs in one module. Each LFO contains two simultaneously available square and triangle waveform outputs. Each output can be skewed to waveform extremes. i.e. square can ...) |
|||
| (14 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image:Dual-LFO-3.jpg|400px||Dual LFO]] | |||
Two independent LFOs in one module. | Two independent LFOs in one module. | ||
| Line 4: | Line 6: | ||
Each output can be skewed to waveform extremes. i.e. square can be skewed from | Each output can be skewed to waveform extremes. i.e. square can be skewed from | ||
narrow-positive pulse widths through square to narrow-negative pulse widths. Triangle | narrow-positive pulse widths through square to narrow-negative pulse widths. | ||
[[Image:MMM LFO POS Pulse small.jpg]] | |||
'''Positive Pulse''' | |||
[[Image:MMM LFO SQUARE small.jpg]] | |||
'''Square''' | |||
[[Image:MMM LFO NEG Pulse small.jpg]] | |||
'''Negative Pulse''' | |||
Triangle | |||
can be skewed from positive saw through triangle to negative saw. | can be skewed from positive saw through triangle to negative saw. | ||
[[Image:MMM LFO SAW small.jpg]] | |||
'''Sawtooth''' | |||
[[Image:MMM LFO Tri small.jpg]] | |||
'''Triangle''' | |||
[[Image:MMM LFO INV SAW small.jpg]] | |||
'''Inverted Sawtooth''' | |||
Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO | Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO | ||
== Availability == | |||
This module is currently available. | |||
'''$195.00''' | |||
[[Dual Low Frequency Oscillator Board |Assembled/ tested board only:]] | |||
'''$89.00''' | |||
== Info == | |||
'''Current draw:''' | |||
V+= 20.00mA | |||
V-= 17.70mA | |||
'''PCB board dimensions:''' | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm | |||
Latest revision as of 16:35, 7 June 2014
Two independent LFOs in one module.
Each LFO contains two simultaneously available square and triangle waveform outputs.
Each output can be skewed to waveform extremes. i.e. square can be skewed from narrow-positive pulse widths through square to narrow-negative pulse widths.
Positive Pulse
Square
Negative Pulse
Triangle can be skewed from positive saw through triangle to negative saw.
Sawtooth
Triangle
Inverted Sawtooth
Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO
Availability
This module is currently available. $195.00
Assembled/ tested board only: $89.00
Info
Current draw:
V+= 20.00mA
V-= 17.70mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
