4x Mixer: Difference between revisions
From MMM Wiki
Jump to navigationJump to search
(New page: 4-input mixer capable of handling audio or CV signals. Simultaneously available inverted and non-inverted outputs. Independent attenuation for each channel "Punch-in" push switch on eac...) |
|||
| (9 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image:Mixer-3.jpg|400px||4 x Mixer]] | |||
4-input mixer capable of handling audio or CV signals. | 4-input mixer capable of handling audio or CV signals. | ||
| Line 5: | Line 9: | ||
Independent attenuation for each channel | Independent attenuation for each channel | ||
"Punch-in" | "Punch-in" toggle switch on each channel to allow for "pre-setting" an | ||
audio or CV source on the channel, then "punching" it into the mix | audio or CV source on the channel, then "punching" it into the mix | ||
for realtime dynamic CV or audio control. | for realtime dynamic CV or audio control. Or simply, a channel on-off switch. | ||
== Availability == | |||
This module is currently available. | |||
'''$190.00''' | |||
[[4x Mixer Board |Assembled/ tested board only:]] | |||
'''$80.00''' | |||
== Info == | |||
'''Current draw:''' | |||
V+= 7.5mA | |||
V-= 7.70mA | |||
'''PCB board dimensions:''' | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm | |||
Latest revision as of 16:50, 7 June 2014
4-input mixer capable of handling audio or CV signals.
Simultaneously available inverted and non-inverted outputs.
Independent attenuation for each channel
"Punch-in" toggle switch on each channel to allow for "pre-setting" an audio or CV source on the channel, then "punching" it into the mix for realtime dynamic CV or audio control. Or simply, a channel on-off switch.
Availability
This module is currently available. $190.00
Assembled/ tested board only:
$80.00
Info
Current draw:
V+= 7.5mA
V-= 7.70mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
