4x 1x2 Buffer Board: Difference between revisions
From MMM Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
The original four channel distribution module that takes an input (audio or CV) and provides two signal outputs per channel. The outputs are buffered in order to prevent signal loss through distribution. | |||
The channel inputs are cascaded to allow for up to 8 simultaneous outputs of a signal patched into channel 1. Patching another signal into another channel will interrupt the cascade and provide buffered signal outputs of the input signal to the new, and all subsequent channels. The number of "multiples" needed for a signal is entirely dependent on how the user patches the signals into the module. | The channel inputs are cascaded to allow for up to 8 simultaneous outputs of a signal patched into channel 1. Patching another signal into another channel will interrupt the cascade and provide buffered signal outputs of the input signal to the new, and all subsequent channels. The number of "multiples" needed for a signal is entirely dependent on how the user patches the signals into the module. | ||
Requires wire kit WK-12 if desired. | Requires wire kit WK-12 if desired. | ||
| Line 16: | Line 16: | ||
This module is available | This module is available | ||
'''$ | '''$80.00''' | ||
To order, visit the [http://www.mattsonminimodular.com/ | To order, visit the [http://www.mattsonminimodular.com/shop MMM Store] | ||
Latest revision as of 10:46, 9 June 2014
The original four channel distribution module that takes an input (audio or CV) and provides two signal outputs per channel. The outputs are buffered in order to prevent signal loss through distribution.
The channel inputs are cascaded to allow for up to 8 simultaneous outputs of a signal patched into channel 1. Patching another signal into another channel will interrupt the cascade and provide buffered signal outputs of the input signal to the new, and all subsequent channels. The number of "multiples" needed for a signal is entirely dependent on how the user patches the signals into the module.
Requires wire kit WK-12 if desired.
Wiring information:
Availability
This module is available
$80.00
To order, visit the MMM Store
Go to board dimensions and mounting
