4x 1x2 Buffer: Difference between revisions
(New page: Four independently buffered "splitters". Plug an audio or CV into a channel input and it will be available on 2 outputs for signal distribution. Preferred over a passive "multiple" becaus...) |
|||
| (12 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image:Buffer-3.jpg|400px||4x-1x2Buffer]] | |||
Four independently buffered "splitters". Plug an audio or CV into a | Four independently buffered "splitters". Plug an audio or CV into a | ||
channel input and it will be available on 2 outputs for signal distribution. | channel input and it will be available on 2 outputs for signal distribution. | ||
| Line 8: | Line 10: | ||
channel signal outputs into all subsequent channel inputs. | channel signal outputs into all subsequent channel inputs. | ||
i.e. Plug a signal into channel 1 and the signal will be available on all 8 outputs. | i.e. Plug a signal into channel 1 and the signal will be available for distribution on all 8 outputs. | ||
Plug an additional signal into channel 2 and the channel 1 signal will now be | Plug an additional signal into channel 2 and the channel 1 signal will now be | ||
available only on the two Channel 1 outputs while the channel 2 signal will be | available only on the two Channel 1 outputs while the channel 2 signal will be | ||
available on the remaining six outputs. The number of signals for distribution | available on the remaining six outputs. The number of signals available for distribution | ||
are entirely dependent on how the input signals are plugged in. | |||
== Availability == | |||
This module is currently available. | |||
'''$190.00''' | |||
[[4x 1x2 Buffer Board |Assembled/ tested board only:]] | |||
'''$80.00''' | |||
== Info == | |||
'''Current draw:''' | |||
V+= 21.3mA | |||
V-= 21.1mA | |||
'''PCB board dimensions:''' | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm | |||
Latest revision as of 16:53, 7 June 2014
Four independently buffered "splitters". Plug an audio or CV into a channel input and it will be available on 2 outputs for signal distribution. Preferred over a passive "multiple" because the buffering rejuvenates the signal negating any signal degradation.
Channel 1 cascades into channel 2, which cascades into channel 3, which cascades into channel 4. This allows for "normalled" expansion of the channel signal outputs into all subsequent channel inputs.
i.e. Plug a signal into channel 1 and the signal will be available for distribution on all 8 outputs. Plug an additional signal into channel 2 and the channel 1 signal will now be available only on the two Channel 1 outputs while the channel 2 signal will be available on the remaining six outputs. The number of signals available for distribution are entirely dependent on how the input signals are plugged in.
Availability
This module is currently available. $190.00
Assembled/ tested board only:
$80.00
Info
Current draw:
V+= 21.3mA
V-= 21.1mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
