Dual Low Frequency Oscillator: Difference between revisions
No edit summary |
|||
Line 49: | Line 49: | ||
This module is currently available. | This module is currently available. | ||
'''$179.00''' | '''$179.00''' | ||
Assembled/ tested board only: | |||
'''$84.95''' | |||
== Info == | |||
Current draw: | |||
V+= 20.00mA | |||
V-= 17.70mA | |||
PCB board dimensions: | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm |
Revision as of 21:29, 31 December 2009
Two independent LFOs in one module.
Each LFO contains two simultaneously available square and triangle waveform outputs.
Each output can be skewed to waveform extremes. i.e. square can be skewed from narrow-positive pulse widths through square to narrow-negative pulse widths.
Triangle can be skewed from positive saw through triangle to negative saw.
Each LFO has independent rate controls. The upper LFO has a lower range than the lower LFO
Availability
This module is currently available. $179.00
Assembled/ tested board only: $84.95
Info
Current draw:
V+= 20.00mA
V-= 17.70mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm