Sample and Hold: Difference between revisions
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
high level, the source voltage present at the time of positive clock | high level, the source voltage present at the time of positive clock | ||
transition is "held" at the output until the clock transitions low again. | transition is "held" at the output until the clock transitions low again. | ||
[[Image:MMM_Track_and_Hold.JPG]] | |||
Slide allows for a slew or glide to be added between output transition voltages. | Slide allows for a slew or glide to be added between output transition voltages. | ||
Revision as of 20:49, 8 November 2008
Internal Triangle LFO for sample source. Can be replaced by inputting an external source into the Ext. Osc. In jack.
Internal square wave LFO for sample rate selection. Can be replaced by inputting an external trigger source into the Ext. Clk. In jack. Source is sampled on the negative to positive transition of the clock.
Track & Hold / Sample & Hold select switch. Bypasses the internal sample
strobe in Track position and allows the source to go directly to the
output during the lower clock level. When the clock transitions to a
high level, the source voltage present at the time of positive clock
transition is "held" at the output until the clock transitions low again.
Slide allows for a slew or glide to be added between output transition voltages.
