DIYcisions DIYcisions

Assembled / Tested Boards

Assembled, tested circuit boards are now available for those customers who have the desire to create their own panels, graphics, layout and use that collection of parts that have been accumulating in a drawer for years.

All available modules have both 6-pin 0.100" MTA and 4-pin 0.156" MTA power connectors mounted on-board. Most modules will perform equally well using +/- 15VDC or +/- 12VDC power supplies. The modules that are affected by the lower power supply will be noted. For those, the shopping cart will ask you to select the power scheme that will be used.

All components used in the module boards are certified RoHS compliant according to the EU directives.

The module circuit boards with the green solder mask and silkscreen are manufactured RoHS compliant. The non-solder mask boards are short run boards and are not RoHS compliant.

Available module circuit boards

The following menu items will show a picture of each module, give a brief description, have a lower resolution wiring sheet for that module and a link to a pdf version of the wiring sheet for customers to view, download and print.

Be sure to read the "DIY Panel wiring general conventions". This document sets the basic parameters on how all of the panel components are wired.

• DIY single module PC board dimensions and mounting suggestions
• DIY Panel wiring general conventions
• Voltage Controlled Filter Board
• Voltage Controlled Amplifier Board
• Dual Low Frequency Oscillator Board
• Sample and Hold Board
• Envelope Generator Board
• Glide Board
• Noise Board
• 4x 1x2 Buffer Board
• 4x Mixer Board
• Amplitude Follower Board
• 4x Gate Delay Board
• Utility 1 Board
• Voltage Controlled Mixer Board

Wire Kits and Power Cables and Accessories

Wire and Cable

Convenience Accessories