Main Page

The Mattson Mini Modular UserWiki

Introduction

The MMM Phoenix series modular synthesizer incorporates true-analog modules housed in a “grab and go” modular format.

Each cabinet contains space for 12 modules fed by an external power supply, providing for a truly portable, 12 module, analog modular system. Multiple cabinets may be interconnected horizontally and vertically to create a modular system of any desired size and configuration.

When you’re ready to go, each pair of cabinets latch face-to face into a compact, protective enclosure measuring 11-3/8” (28.89cm) W X 15” (38.1cm) H X 7” (17.78cm) D. Roughly, the size of 6 packages of printer paper stacked 3 high, side by side. Full sets of male and female hinges for interlocking cabinets are sold seperately.

A single cabinet system measures 11.5” (29.21cm) W X 15” (38.1cm) H X 3.5” (8.89cm) D. As your budget and needs grow, the system has been designed to interlock with additional systems, horizontally and vertically, for virtually infinite system expansion.

Each system with a MIDI module responds to one of 16 MIDI channels if so desired. Grow your system into a larger system with more creative power available than is available in a larger format system of the same size. When it’s time to go, the entire system breaks down easily into independent, easy to transport cases.

MMM Modules

The modules conform to the electrical audio and CV standards of most of the currently available systems and can be cross-patchable with other manufacturers systems.

• MIDI/Power Control
• Voltage Controlled Oscillator
• Voltage Controlled Filter
• Voltage Controlled Amplifier
• Dual Low Frequency Oscillator
• Voltage Controlled Dual Low Frequency Oscillator
• Sample and Hold
• Envelope Generator
• Glide
• Noise
• 4x 1x2 Buffer
• 4x Mixer
• Amplitude Follower
• Aux Power Control
• 4x Gate Delay
• HandiCon
• Quantizer
• Sequencer
• Utility 1
• Voltage Controlled Mixer