Envelope Generator: Difference between revisions
No edit summary |
|||
| Line 19: | Line 19: | ||
This module is currently available. | This module is currently available. | ||
'''$239.00''' | '''$239.00''' | ||
Assembled/ tested board only: | |||
'''$74.95''' | |||
== Info == | |||
'''Current draw:''' | |||
V+= 25.5mA | |||
V-= 0mA | |||
'''PCB board dimensions:''' | |||
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm | |||
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner | |||
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm | |||
Revision as of 21:35, 31 December 2009
ADSR transient generator with independent control of the Attack, Decay, Sustain and Release stages of the envelope.
Output is a varying control voltage from 0-5V.
Repeat switch. Allows for automatic repeat of the envelope sequence.
Repeat Level. Allows for selection of the envelope output level where the repeat function will re-trigger.
Man gate pushbutton allows for manually triggering the envelope.
Availability
This module is currently available. $239.00
Assembled/ tested board only: $74.95
Info
Current draw:
V+= 25.5mA
V-= 0mA
PCB board dimensions:
3.125" (3-1/8") 79.38mm X 2.625" (2-5/8") 66.68mm
Mounting holes: 0.125" (1/8") 3.18mm (for 4-40 screw) 4 holes, one in each corner
Mounting hole spacing; Length: C-C= 2.925" 74.3mm, Width: C-C= 2.425" 61.6mm
