4x Gate Delay Board: Difference between revisions
From MMM Wiki
Jump to navigationJump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[Image:Gate-Delay-Board.jpg|400px||Gate Delay Board]] | [[Image:Gate-Delay-Board.jpg|400px||Gate Delay Board]] | ||
The 4-Channel gate delay provides four independent gate outputs that are delayed based on the user-controlled time setting after the initial trigger event. | |||
The input can be a gate or a continuous CV. The level control adjusts the event trigger level to respond from ~0.7VDC to 6VDC. When the input CV is dropped below the threshold level, all outputs will drop. Any channel that hasn't reached it's set "on" event time will not trigger until the input CV is above the threshold level for at least the length of the channel delay time. | |||
== Wiring information: == | == Wiring information: == | ||
Revision as of 16:15, 14 September 2010
The 4-Channel gate delay provides four independent gate outputs that are delayed based on the user-controlled time setting after the initial trigger event. The input can be a gate or a continuous CV. The level control adjusts the event trigger level to respond from ~0.7VDC to 6VDC. When the input CV is dropped below the threshold level, all outputs will drop. Any channel that hasn't reached it's set "on" event time will not trigger until the input CV is above the threshold level for at least the length of the channel delay time.
Wiring information:
Availability
This module is available
$74.95
To order, visit the MMM Store
Go to board dimensions and mounting
