Sample and Hold: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
is sampled on the negative to positive transition of the clock. | is sampled on the negative to positive transition of the clock. | ||
[[Image:MMM_Sample_and_Hold.JPG]] | [[Image:MMM_Sample_and_Hold.JPG]] | ||
'''Pseudo Random output''' | |||
| Line 17: | Line 18: | ||
transition is "held" at the output until the clock transitions low again. | transition is "held" at the output until the clock transitions low again. | ||
[[Image:MMM_Track_and_Hold.JPG]] | [[Image:MMM_Track_and_Hold.JPG]] | ||
'''Track and Hold output''' | |||
| Line 23: | Line 25: | ||
Slide allows for a slew or glide to be added between output transition voltages. | Slide allows for a slew or glide to be added between output transition voltages. | ||
[[Image:MMM_Sample_and_Hold_w_lag.JPG]] | [[Image:MMM_Sample_and_Hold_w_lag.JPG]] | ||
'''Slew adds transition glide to output''' | |||
Revision as of 13:24, 21 December 2008
Internal Triangle LFO for sample source. Can be replaced by inputting an external source into the Ext. Osc. In jack.
Internal square wave LFO for sample rate selection. Can be replaced by
inputting an external trigger source into the Ext. Clk. In jack. Source
is sampled on the negative to positive transition of the clock.
Pseudo Random output
Track & Hold / Sample & Hold select switch. Bypasses the internal sample
strobe in Track position and allows the source to go directly to the
output during the lower clock level. When the clock transitions to a
high level, the source voltage present at the time of positive clock
transition is "held" at the output until the clock transitions low again.
Track and Hold output
Slide allows for a slew or glide to be added between output transition voltages.
Slew adds transition glide to output
