Sequencer

Features

Work has been progressing on this module. It has also changed.

There will be four products derived from this endeavor:

1: The revised MMM format 3-wide main sequencer

2: A 2-wide Sequencer expansion module

3: A combined stand-alone unit housed in a walnut case with a power entry

4: The stand-alone version in a 52HP Euro format manufactured and available from Division-6

The following features have been added to the basic system:

Rows 1 and 3 can be daisy chained to provide 16-channel sequencing.

A user tap-tempo mode that overrides the internal VC or external Clocks providing both timing and gate-length.

Global and Individual stage 0/+1 octave shift.

Three user-selectable gate length outputs: Short, follow(the clock duty cycle) and long.

Row 1 and/or row 3 quantized/linear output selection (1V/O format)

I/O re-design to allow for easy daisy-chaning of multiple systems.

Run-on-Gate input added to allow for sequencer stage advance only during a gate applied to the input.

Ping-Pong and random modes added to directional options.

Manual push-button mute during run operation.

Features added and included in the Expansion Module, the Stand-alone Module and the Euro module versions:

16 independent stage gate outputs (+5V)

Additional I/O to assist with multiple system expansion.

A foot switch jack that parallels the panel pushbutton or, can be configured with a jumper for use with future features.

MIDI output providing note on/off, note value and octave shifts for recording the programmed events on a MIDI recorder.

USB port for updating the software version from the web.

This module is almost available.

Best guess is April, 2012

The following price structure has been calculated:

3X wide Main Sequencer Module: $729.00

2X wide Expansion Module: $239.00

Stand-Alone version with Walnut case and power entry: $1,054.00

Division-6 52HP Euro format version: $HNI (Have No Idea)