4x Gate Delay

Features

The 4X Gate Delay serves as a gate generating module. If minimum delay is selected, it can be used as a four-gate multiple.

The gate delay responds to an external gate and generates four gates. Each gate output can be delayed independently.

The "gate in" is sort of mis-labeled. A CV can be utilized, such as a 1V/O keyboard voltage, the Level Adj can be used to determine at what point the gate delay process will begin. You can set it to not generate any gates until a specific key or above has been played. As soon as a key lower than the set level is played, all gates drop.

Gate in: Input for an external gate or CV

Level Adj: Sets the level that a CV input will start the delay sequence. If a gate is used as an input, the gate voltage is higher than any preset level and will work automatically without having to re-adjust the level.

Gate on LED: Indicates that a gate is present or a CV input has reached the level to initiate the delay sequence.

Delay: Sets the amount of time that gate output will delay after yhe delay sequence is initiated.

Red LED: Indicates that the delay time has been reached and the delayed gate is active on that channel.

Out (1-4): The channel delayed gate outputs.

Availability

This module is currently available.