Starter Systems

From MMM Wiki
Revision as of 07:09, 4 August 2011 by GMattson (talk | contribs)
Jump to navigationJump to search

Created for the budget concious, The basic starter systems save about $200.00 from ordering the system components individually.

Each system is configured to provide a two oscillator voice chain with the basic routing, mixing and modulation CV source modules to get you going right from the start.

Power supply or DC interconnect cable must be ordered seperately.

[Power Supply Locator Page]

Left:

Horizontal, Walnut Starter system without MIDI.

Right:

Vertical, Maple Starter system with MIDI


There are two basic systems available:

A system containing a MIDI/CV controller for tonal based patches MIDI - Power Control

And, a system with a Power entry module for front panel power control and a Utility 1 module for generating manual or clocked gates for the more allegoric pallate.


Both systems contain the following modules:

Sources:

2X VCO-J Voltage controlled oscillators. 6 simultaneous waveform outputs.

1X Noise Generator. Simultaneous white, pink and slow random outputs.

Modifiers:

1X VCF, Voltage controlled filter. 4-Pole, 24 dB/Oct state variable.

1X VCA, Voltage controlled amplifier. With morphing amplitude through ring modulation.

Control voltage generation:

1X Envelope Generator. 4-stage ADSR with manual trigger and repeat functions.

1X VC LFO. Voltage controlled dual low frequency oscillator.

1X Sample and Hold. Includes internal LFO sample source and clock, Plus, track and hold selection.

Mixing and signal routing:

1X VC Mixer. 4-channel voltage controlled mixer with normal and inverting outputs. Can be used for audio or CV signals.

1X Buffered Multiple. 4 X 2 signal distribution buffered multiple.


Options:

Either system can be ordered in the vertical (3X4) or horizontal (4X3) case configuration.

Either case can be ordered in Maple or Walnut. Selection of Walnut material will add $15.00.


Notes:

Power supply and/or DC Interconnect cable must be ordered seperately. A Power supply can provide enough power to run up to three systems. Second and third cabinets will only need the DC Interconnect cable.


Availability

These systems are available

Starting at $2,695.00

To order, visit the Shopping cart